Gravity Catch to Concrete

Description

The gravity catch to concrete is a similar principle as the mortise gravity catch but can concreted into the ground, drive way or installed into slabs.
A gravity catch is a closing catch for a gate which remains shut under gravity.
This gravity catch is specifically designed to be fitted into concrete.
The catch has a weight which hold the catch down against the brickwork or wall. When  a gate closes onto it, the gate rail pushes the latch down until it passes the catch when it clicks back up holding the gate shut under gravity.

We also stock a gravity catch to mortise which is the same principle catch but it is fitted through a hole in a timber post.

Length approx. 305mm (12″)
Overall width approx. 90mm ( 3 1/2″)
Overall depth approx. 60mm (2 1/2″)
Finish cast iron galvanised