How to install your Tate Fencing Large Tool Store
The Tate Fencing guide to assembling your large tool store. We have put together this installation guide to show you how to assemble your large tool store. You can download or print a copy by clicking on the “Download as PDF button“. If you require any further help please don’t hesitate to contact a member of our sales team, we are more than happy to assist you.
Step 1 – Ensure the shed has a level & sufficient base in place. A concrete or sleeper base is ideal. Position the floor ensuring it is level.
Step 2 – With the floor in place, each panel can now be positioned & screwed together starting with the back panel.
Step 3 – The side panels sit on top of the floor panel. The cladding over hangs the floor panel and finishes flush to the edge.
Step 4 – The second panel is positioned in place. Butted up tight to the other panel.
Step 5 – Once both sides are in place, you should have something that looks like this. The panels should be screwed together as you go.
Step 6 – The last panel to be fitted and screwed into place is the front panel.
Step 7 – The panels can be secured by screwing through the framework, as shown above.
Step 8 – Next step is to fit the roof panel which should slot into position around the framework of the store.
Step 9 – Roll the felt across the roof leaving approx. 60mm overhang. Advisable to felt this panel before fitting.
Step 10 – Cut the felt leaving 60mm overhang – enough to fold & tack.
Step 11 – Fold the felt neatly at the corner and tack along the roof edge. Repeat in all 4 corners.
Step 12 – The side edging boards are then cut to fit and nailed to sandwich the felt along the roof edge.
Step 13 – The excess front and rear edging boards are trimmed with a handsaw for a perfect fit.
Step 14 – You have been provided with 6 x shelf supports that can now be fixed at the same level height to the framework.
Step 15 – These supports should be screwed into into the far corner and the supports either side.
Step 16 – Once the supports are secure, the half width shelf can be positioned & screwed into framework.
Step 17 – Attach the double doors supplied by screwing the hinges into the front framework.
Step 18 – Next, you must secure the keep element of your brenton bolt that will keep your door closed.
Step 19 – Your large tool store is now complete!
